🦋 Welcome to the MAIN() IRC channel of the Raku Programming Language (raku.org). This channel is logged for the purpose of keeping a history about its development | evalbot usage: 'm: say 3;' or /msg camelia m: ... | Log inspection is getting closer to beta. If you're a beginner, you can also check out the #raku-beginner channel!
Set by lizmat on 25 August 2021.
00:02 reportable6 left 00:05 gordonfish- joined 00:06 Skarsnik_ left, gordonfish left 00:10 gordonfish- left, gordonfish joined
Ergo444 hi 00:21
00:21 Ergo444 left 00:29 gordonfish left 00:32 gordonfish joined
[Coke] hi 00:35
m: say (3/99).nude 00:36
camelia (1 33)
[Coke] ^^ is there a way to make that work without parens? some other way to force the precedence?
moon-child m: say .nude given 3/99 00:37
camelia (1 33)
moon-child ideally you would be able to say '3/99 .nude'. It works for negatives and complex numbers, but not fractions apparently
[Coke] heh. I literally had that typed out and was going to send it. :) 00:38
moon-child :)
japhb m: say 3/99\.nude # Curious 01:27
camelia No such method 'nude' for invocant of type 'Int'. Did you mean any of
these: 'NFD', 'Num', 'none', 'note'?
in block <unit> at <tmp> line 1
japhb Ah well
m: say 3/99\ .nude # Curious
camelia No such method 'nude' for invocant of type 'Int'. Did you mean any of
these: 'NFD', 'Num', 'none', 'note'?
in block <unit> at <tmp> line 1
japhb Well, so much for that idea
moon-child if you find angle brackets more to your liking than parenthesis, you can do 01:28
m: say <3/99>.nude
camelia (1 33)
moon-child (imo angle brackets are easier to parse, because their contents have limited lexical complexity; YMMV)
01:32 linkable6 left, evalable6 left 01:34 evalable6 joined 01:35 linkable6 joined
japhb m: say <3/99>.WHAT 01:37
camelia (Rat)
japhb m: say < 3/99 >.WHAT
camelia (RatStr)
japhb But be careful of that difference ^^
One is a Rat literal, the other is a string converted by val() to a RatStr
02:05 reportable6 joined 02:18 mcmillhj joined 03:06 mcmillhj left 04:06 reportable6 left, unicodable6 left, greppable6 left, notable6 left, linkable6 left, quotable6 left, coverable6 left, benchable6 left, statisfiable6 left, bloatable6 left, bisectable6 left, tellable6 left, evalable6 left, committable6 left, squashable6 left, releasable6 left, nativecallable6 left, shareable6 left, sourceable6 left 04:07 benchable6 joined, sourceable6 joined, nativecallable6 joined 04:08 bloatable6 joined, linkable6 joined 04:09 evalable6 joined, statisfiable6 joined 04:44 mcmillhj joined
mcmillhj A bit confused about set operations, specifically inequality. In this gist, why is `$last` `(Any)`: gist.github.com/mcmillhj/a54ea1515...ae81218f74 04:46
moon-child != is numeric inequality, which I expect is not what you want 04:48
mcmillhj Both inputs are Sets so I thought it would use the Set inequality operator. It there some way that I need to indicate that I want that operator used? 04:50
moon-child !(==) is the set inequality operator 04:51
(or, really it is (==) that is the set equality operator, to which the ! metaoperator can be applied. But, potato potato) 04:52
mcmillhj ah whoops, I was misreading ≢ in the docs as != ... That's my mistake. Thanks for the help! 04:53
moon-child np
04:56 colemanx left 05:02 mcmillhj left 05:04 frost joined 05:06 notable6 joined, unicodable6 joined 05:07 committable6 joined 05:08 greppable6 joined 05:09 coverable6 joined, shareable6 joined, reportable6 joined 05:36 b2gills joined 06:02 reportable6 left 06:06 tellable6 joined 06:07 releasable6 joined 06:08 bisectable6 joined 06:49 euandreh left 07:04 reportable6 joined 07:07 quotable6 joined 07:11 vrurg_ joined, frost left, MasterDuke left 07:12 vrurg left, frost joined 07:26 seednode left 07:27 seednode joined 07:28 abraxxa joined 07:31 ugexe left, ugexe joined 07:35 abraxxa left 07:36 abraxxa joined 07:50 TheAthlete joined 07:52 Ergo444 joined
Ergo444 hi 07:52
TheAthlete Hello!
Ergo444 I have this problem... stackoverflow.com/questions/702864...-correctly 08:00
08:03 Sgeo left 08:06 squashable6 joined
moritz_ I've answered on SO, hope it helps 08:09
Ergo444 I added more information 08:11
It is not that simple.
The program keeps running, doing stuff
The full output is printed when the program ends.. with a considerable delay. 08:12
08:12 jjido joined
Ergo444 I think it buffers the output.....for a while before printing 08:18
how to make it print more often?
moritz_ see my updated answer 08:19
Ergo444 ok 08:21
but if I run the program in itself... it does not delay that much. 08:22
moritz_ (having the discussion in two different places in parallel doesn't work well)
SmokeMachine m: say 3/99 .nude 08:23
camelia No such method 'nude' for invocant of type 'Int'. Did you mean any of
these: 'NFD', 'Num', 'none', 'note'?
in block <unit> at <tmp> line 1
moritz_ I don't think that the space lowers the precedence 08:25
Ergo444 saying the same thing everywhere 08:27
08:34 jjido left 08:44 Oshawott left 08:50 MasterDuke joined 09:10 synthmeat left 09:12 dakkar joined 09:16 archenoth joined 09:20 TempIRCLogger left 09:21 TempIRCLogger joined 09:22 archenoth left
SmokeMachine moritz_: shouldn't it? it works for ^10 .max (or am I misremembering it?) 09:28
m: say ^10 .max 09:29
camelia 10
SmokeMachine m: say ^10 .min
camelia 0
SmokeMachine m: say ^10.min
camelia Potential difficulties:
Precedence of ^ is looser than method call; please parenthesize
at <tmp>:1
------> 3say ^107⏏5.min
^10
09:30 Skarsnik_ joined 09:34 frost left, MasterDuke left 09:39 frost joined 09:44 MasterDuke joined 09:47 jjido joined 10:07 Merfont left 10:12 TempIRCLogger left, TempIRCLogger joined 10:25 synthmeat joined 10:29 RakuIRCLogger left, RakuIRCLogger joined 10:31 Geth left 10:36 Geth joined 10:37 patrickb joined 11:25 ab5tract joined 11:30 jjido left 11:39 gordonfish- joined 11:41 gordonfish left 11:51 Skarsnik_ left 12:02 reportable6 left 12:06 archenoth joined 12:09 Kaiepi joined 12:20 Guest85 joined
ab5tract hmm... is it curious that Bags don't have a median method? 12:25
12:26 b2gills left
Guest85 Hi All, 12:27
How would you solve this? 12:28
blogger.googleusercontent.com/img/...=w640-h370
m: <25 2 10 3 20 5 15 0>.combinations(3).grep: *.sum == 35;
camelia ( no output )
Guest85 That does not count multiple throws at the same dart board score. 12:29
12:29 synthmeat left
Guest85 I got as far as: 12:29
m: say sort gather { 12:30
camelia 5===SORRY!5=== Error while compiling <tmp>
Missing block
at <tmp>:1
------> 3say sort gather {7⏏5<EOL>
Guest85   for ([X,] <25 2 10 3 20 5 15 0> xx 3) {
    take sort $_ if (sum $_) == 35;
  }
}
But that does not make the list unique and I'm struggling with 'with'.
ab5tract m: 34.5 .ceil 12:34
camelia No such method 'ceil' for invocant of type 'Rat'. Did you mean any of
these: 'Real', 'cis', 'perl', 'tail'?
in block <unit> at <tmp> line 1
ab5tract ^^^ LTA bug: .ceil should mention .ceiling :)
El_Che cis 12:35
lol
12:52 Kaiepi left, Kaiepi joined
lizmat github.com/rakudo/rakudo/commit/57adbb1ef0 # ab5tract 12:55
aaah... it *is* 13:00
oops, ww
Geth ecosystem: c68d532e11 | (Elizabeth Mattijsen)++ | META.list
Text::Markdown now lives in the zef ecosystem
 13:02
13:04 euandreh joined
ab5tract lizmat: I had a feeling it wouldn't last too long :D 13:04
13:05 jgaz joined, reportable6 joined
lizmat ab5tract: I wonder if there are many more of these false friends 13:06
do you know of any offhand that wouldn't be caught already ?
ab5tract lizmat not off the top of my head, no 13:25
13:38 patrickb left 13:41 kostas joined 13:47 kostas left, kostas joined 13:52 Guest85 left
Ergo444 Are threads safe to use with perl5 modules? 13:57
14:00 lucs left, tonyo left
MasterDuke Ergo444: i believe so, but nine would know for sure 14:00
14:01 lucs joined
Ergo444 I encountered some problems 14:01
14:01 tonyo joined 14:05 Zero_Dogg left, Zero_Dogg joined 14:24 lizmat_ joined 14:27 lizmat left 14:39 synthmeat joined 14:44 monkey_ joined 15:00 Guest85 joined 15:12 frost left 15:16 euandreh left 15:39 ab5tract left 15:45 euandreh joined, xinming joined 15:48 ab5tract joined
ab5tract Ergo444: IIRC you need to have Perl compiled with support for having more than one interpreter in memory 15:49
I forget the specific flag
El_Che -Dusethreads 15:52
ab5tract El_Che: I think it is actually separate from that flag, though the use of -Dusethreads implies/enforces the flag I'm thinking of. 15:54
I'm relatively confident that it is -Duseshrplib 15:56
15:59 synthmeat left 16:00 synthmeat joined
ab5tract though looking at the docs here makes me question whether that is correct.. metacpan.org/dist/perl/view/INSTAL...rl-library 16:02
16:02 synthmeat left
ab5tract as -Dusethreads doesn't mention anything about an associated performance penalty 16:02
16:07 [Coke] left 16:09 synthmeat joined, lizmat_ left 16:10 lizmat joined
ab5tract m: my @a = [[1,2,3],[4,5,6]]; @a.unshift: [0,0,0]; @a.append: [0,0,0]; dd @a 16:10
camelia Array @a = [[0, 0, 0], [1, 2, 3], [4, 5, 6], 0, 0, 0]
ab5tract why does append "un-array" my value?
m: my @a = [[1,2,3],[4,5,6]]; @a.unshift: [0,0,0]; @a.append: $[0,0,0]; dd @a 16:11
camelia Array @a = [[0, 0, 0], [1, 2, 3], [4, 5, 6], [0, 0, 0]]
16:11 synthmeat left
ab5tract ok, so there is the solution.. but it feels like a WAT to me 16:11
16:12 [Coke] joined
[Coke] . 16:12
lizmat ab5tract: why use .append and not .push ?? 16:14
m: my @a; @a.push: [1,2,3]; dd @a 16:15
camelia Array @a = [[1, 2, 3],]
lizmat .append and .prepend where specifically created for their flattening behaviour
16:17 seednode left 16:19 seednode joined 16:21 synthmeat joined
ab5tract lizmat: doh! that was a total thinko on my part. of course .push is the corresponding method for .unshift 16:21
lizmat ok, glad to be able to clear that up :-)
ab5tract lizmat: much appreciated :D 16:22
lizmat the reason that .push doesn't have single arg semantics
is whether @array.push(@array.pop) should restore the array in the original state regardless of the contents of the last elemen 16:23
t
16:30 lichtkind joined 16:32 gordonfish- is now known as gordonfish 16:40 dextercd joined 16:41 monkey_ left 16:53 lichtkind left 16:54 lichtkind joined 16:55 lichtkind left, lichtkind joined
ab5tract lizmat++ thanks for the explanation 17:01
17:02 monkey_ joined 17:03 kostas left 17:09 xinming left 17:17 synthmeat left 17:23 [Coke]_ joined 17:26 [Coke] left 17:27 linkable6 left 17:28 seednode left 17:33 seednode joined 17:36 synthmeat joined, dakkar left
merryprog Hey lizmat, do you know where the regex engine is implemented? Looking to make a bugfix or positive lookbehinds 17:43
my code search-fu isn't turning up where the main logic happens 17:44
moon-child merryprog: github.com/Raku/nqp/tree/master/src/QRegex 17:45
merryprog ah that'd be why :P was looking in Rakudo
thank you!
18:00 monkey_ left 18:02 reportable6 left 18:05 reportable6 joined 18:06 gcd left 18:12 ab5tract left 18:15 abraxxa left 18:26 Guest85 left 18:28 linkable6 joined 19:09 jjido joined 19:14 linkable6 left 19:38 [Coke]_ is now known as [Coke] 20:32 Skarsnik_ joined 20:47 happy-dude left, sienet_ja_LSD[m] left, AlexDaniel left 20:48 Manifest0 left 20:49 andrea[m] left, demostanis[m] left 20:51 CIAvash left, mathias[m]12 left, Arathorn left 20:56 vrurg_ is now known as vrurg
merryprog yay my rakudo installation is broken 🙃 20:58
raku repl wasn't working, homebrew uninstalled rakudo-star, homebrew installed rakudo, now errors with "Unhandled exception: Missing or wrong version of dependency 'gen/moar/stage2/MASTNodes.nqp' (from 'gen/moar/Pod.nqp')" 20:59
(Raku repl wasn't working = no prompt would ever appear and didn't respond to input)
tonyo merryprog: what is the bug with positive lookbehinds? 21:01
merryprog tonyo variable interpolation in a positive lookbehind will effectively reverse the argument 21:02
m: my $num = 12; say S:g/<?after $num>/!/ with "12 21"; say S:g/<?after 12>/!/ with "12 21"
camelia 12 21!
12! 21
merryprog what seems to be happening is it reverses the ast (or something magical, I don't really know) when doing a lookbehind but for some reason it doesn't compare the interpolated reversed during that comparison 21:03
21:03 Arathorn joined
lizmat merryprog: that feels like a known issue, fwiw 21:08
merryprog oh. Checked the issue tracker but didn't see it.
lizmat maybe in nqp ?
merryprog yeah
Looks like the lookbehind stuff is a bit WIP considering its test suite is commented out :P
lizmat could very well be
21:08 CIAvash joined 21:09 mathias[m]12 joined
merryprog If it is known/WIP then I won't bother looking into this more—I underestimated how scary AST combined with Regex parsing would be... 21:11
[Coke] We should make sure there's a bug open, probably 21:12
anyone else having issues with AOC Day 8, Part 2 (no spoilers) 21:13
(I solve the sample data, but not the real data)
21:14 Manifest0 joined 21:16 AlexDaniel joined, sienet_ja_LSD[m] joined 21:17 linkable6 joined
MasterDuke merryprog: there was some chat about that bug over in #moarvm last night logs.liz.nl/moarvm/2021-12-08.html#21:25 21:21
merryprog oh nice, you beat me to it :)
MasterDuke well, i haven't fixed anything
feel completely free to beat me to that 21:22
merryprog well you actually know what you're doing...
MasterDuke ha, almost entirely untrue when it comes to the grammar/regex implementation 21:23
merryprog pfft
21:24 gcd joined
japhb I knew MasterDuke was going to say something like that, but it ruins the humble if someone else says it for them. ;-) 21:28
MasterDuke heh. wish i was exaggerating the humbleness, but not the case this time 21:29
tonyo m: m: my $num = 12; say S:g/<?after "$num">/!/ with "12 21"; 21:31
camelia 12 21!
tonyo oop
21:41 TheAthlete left 21:48 lichtkind_ joined 21:51 demostanis[m] joined, lichtkind left 21:52 andrea[m] joined 21:55 ggoebel joined
ggoebel coke: I was able to solve AOC day 8 part 2. can you share your input? and answer? I'll run code against it and let you know if I get the same result (no spoilers) 21:58
22:22 andrea[m] left, AlexDaniel left, CIAvash left, Arathorn left, mathias[m]12 left, demostanis[m] left, sienet_ja_LSD[m] left, hobbs joined
hobbs gist.github.com/arodland/b433602c1...e295e0374a -- advent of code day 8 (yesterday) in raku. Mildly untidy but Raku made a decent fit 22:23
22:24 CIAvash joined
elcaro OH! When was slippy semilist (`@m[||@xy]`) added to v6.e.PREVIEW ?! I'm sure it didn't work last time I tried 22:26
22:26 AlexDaniel joined, happy-dude joined, Arathorn joined, demostanis[m] joined, andrea[m] joined, mathias[m] joined
elcaro Which admittedly was probably 12 months ago 22:26
22:26 sienet_ja_LSD[m] joined
elcaro To which I mean... I know it was added to Associatives a while back (`.{||@keys}`), but I'm sure I tried it on an Array at the time and it didn't work 22:28
22:31 hobbs left 22:42 Ergo444 left 22:43 euandreh left 22:46 happy-dude left 22:47 Arathorn left, happy-dude joined, AlexDaniel left 22:48 CIAvash left 22:52 demostanis[m] left 23:14 andrea[m] left, lichtkind_ left 23:16 Sgeo joined 23:19 jjido left
[Coke] ggoebel: found the bug in my algo. Just got lucky on the sample data. 23:29
23:29 CIAvash joined 23:30 AlexDaniel joined, Arathorn joined, demostanis[m] joined, andrea[m] joined 23:45 euandreh joined
[Coke] (my bug depended on the order of digits on the LHS) 23:46
23:56 Skarsnik_ left

Powered by Cro and the Raku® Programming Language.

Please report any issues / comments / feature requests as an issue on App::Raku::Log.

Thank you!