🦋 Welcome to Raku! raku.org/ | evalbot usage: 'p6: say 3;' or /msg camelia p6: ... | irclog: colabti.org/irclogger/irclogger_log/raku
Set by ChanServ on 14 October 2019.
00:01 MasterDuke left 00:12 oddp left 00:15 sena_kun joined, aborazmeh joined, aborazmeh left, aborazmeh joined 00:17 Altai-man_ left, sena_kun left, sena_kun joined 00:26 xelxebar_ left, xelxebar joined 00:38 xelxebar left 00:45 aborazmeh left, xelxebar joined 00:48 aborazmeh joined, aborazmeh left, aborazmeh joined
guifa2 How does one make an native array of arrays? 01:21
m: my array @a = (my int @ = 0,1,2); say @a.WHAT 01:22
camelia Type check failed in assignment to @a; expected array but got Int (0)
in block <unit> at <tmp> line 1
guifa2 m: my int @foo = my int @ = 1,2,3;
camelia ( no output )
guifa2 m: my int @a = my int @ = 1,2,3; say @a.WHAT 01:23
camelia (array[int])
guifa2 so that creates a single item native array of native arrays of ints, but with only one item 01:24
m: my int @a = (my int @ = 1,2,3), (my int @ = 1,2,3); say @a.WHAT
camelia This representation (VMArray) cannot unbox to a native int (for type array[int])
in block <unit> at <tmp> line 1
guifa2 err 01:26
my array @a = (my int @ = 1,2,3), (my int @ = 1,2,3); say @a.WHAT
evalable6 (Array[array])
guifa2 the array gets upgraded to an Array, because of the comma operator
01:28 yuplushi joined 01:58 molaf left 02:04 yuplushi left 02:05 ManifestO left 02:06 ManifestO joined 02:10 molaf joined 02:14 Altai-man_ joined 02:17 sena_kun left 02:30 aindilis left 02:34 Zero_Dogg left 02:45 aborazmeh left 02:47 Zero_Dogg joined 03:16 molaf left 03:23 mistersir left 03:34 skids left 03:42 Kaiepi left 03:44 Kaiepi joined 03:45 Kaiepi left, Kaiepi joined 04:14 Kaiepi left 04:15 sena_kun joined 04:16 Altai-man_ left 04:18 Kaiepi joined 04:43 reach_satori_ joined 04:45 reach_satori left 05:03 wamba joined 05:18 yuplushi joined 06:02 kensanata joined 06:06 xinming left 06:08 xinming joined 06:14 xelxebar left, Altai-man_ joined, xelxebar joined 06:17 sena_kun left 06:31 abraxxa joined 06:38 abraxxa left 06:40 abraxxa joined 06:45 abraxxa left 06:48 abraxxa joined 06:49 leont joined 07:06 gnufr33dom left 07:13 JJMerelo joined 07:22 agentzh left, agentzh joined, agentzh left, agentzh joined 07:34 Petr37 left 07:38 dakkar joined 07:47 pecastro joined 08:02 MasterDuke joined 08:08 wamba left 08:10 ab5tract joined
ab5tract o/ * 08:10
anyone know whether it is possible to pass a "combined metaop" as a reference? (something like `&Z[&<+>]` or the like) 08:12
08:13 wamba joined 08:15 sena_kun joined 08:16 luk_v joined, Altai-man_ left
luk_v .tell Petr37 use Cro::HTTP::Client; my $resp = await Cro::HTTP::Client.get('google.com', :!follow); say "$resp.request.uri()"; 08:18
tellable6 luk_v, I'll pass your message to Petr37
luk_v .tell Petr37 cro.services/docs/reference/cro-http-client 08:19
tellable6 luk_v, I'll pass your message to Petr37
08:20 luk_v left
JJMerelo m: token alt-alnum { <alnum> | <alnum>.+ }; say "þ," ~~ &alt-alnum 08:23
camelia 5===SORRY!5===
Undeclared routine:
alt-alnum used at line 1

Other potential difficulties:
Useless declaration of a has-scoped method in mainline (did you mean 'my token alt-alnum'?)
at <tmp>:1
------> 3token 7⏏5…
JJMerelo m: token alt-alnum { <alnum> | <alnum>.+ }; say "þ," ~~ /<alt-alnum>/ 08:24
camelia Potential difficulties:
Useless declaration of a has-scoped method in mainline (did you mean 'my token alt-alnum'?)
at <tmp>:1
------> 3token 7⏏5alt-alnum { <alnum> | <alnum>.+ }; say "
No such method 'alt-alnum' for invocant…
JJMerelo m: my token alt-alnum { <alnum> | <alnum>.+ }; say "þ," ~~ &alt-alnum;
camelia ｢þ｣
alnum => ｢þ｣
JJMerelo m: my token alt-alnum { <alpha> |<alpha>.+ }; say "þ," ~~ &alt-alnum; 08:25
camelia ｢þ,｣
alpha => ｢þ｣
JJMerelo m: my token alt-alnum {^^ <alpha> |<alpha>.+ $$}; say "þ," ~~ &alt-alnum; 08:26
camelia ｢þ,｣
alpha => ｢þ｣
JJMerelo m: my token alt-alnum {^^ <alnum> |<alnum>.+ $$}; say "þ," ~~ &alt-alnum;
camelia ｢þ｣
alnum => ｢þ｣
JJMerelo ^^^ Not good, I guess. 08:27
committable6: releases my token alt-alnum {^^ <alnum> |<alnum>.+ $$}; say "þ," ~~ &alt-alnum; 08:29
committable6 JJMerelo, ¦releases (45 commits): «｢þ｣␤ alnum => ｢þ｣␤» 08:30
JJMerelo committable6: releases my token alt-alnum {^^ <graph> |<graph>.+ $$}; say "þ," ~~ &alt-alnum; 08:31
committable6 JJMerelo, ¦releases (45 commits): «｢þ｣␤ graph => ｢þ｣␤»
JJMerelo committable6: releases my token alt-alnum {^^ <alpha> |<alpha>.+ $$}; say "þ," ~~ &alt-alnum;
committable6 JJMerelo, ¦releases (45 commits): «｢þ,｣␤ alpha => ｢þ｣␤» 08:32
JJMerelo committable6: releases my token alt-alnum {^^ <alpha> |<alnum>.+ $$}; say "þ," ~~ &alt-alnum; 08:33
committable6 JJMerelo, ¦releases (45 commits): «｢þ｣␤ alpha => ｢þ｣␤» 08:34
JJMerelo Er
08:35 Sgeo left
JJMerelo Well, R#3830 includes all that above. 08:36
linkable6 R#3830 [open]: github.com/rakudo/rakudo/issues/3830 [regex] Strange token alternation errors with <alnum> and <graph>
JJMerelo committable6: releases my token alt-alnum {^^ [<alpha> | <alpha>.+ | <alnum>.+] $$}; say "þ," ~~ &alt-alnum; 08:37
committable6 JJMerelo, ¦releases (45 commits): «｢þ,｣␤ alpha => ｢þ｣␤» 08:38
JJMerelo committable6: releases my token alt-alnum {^^ [<alnum> | <alpha>.+ | <alnum>.+] $$}; say "þ," ~~ &alt-alnum;
08:38 rindolf joined
committable6 JJMerelo, ¦releases (45 commits): «｢þ,｣␤ alpha => ｢þ｣␤» 08:38
JJMerelo committable6: releases my token alt-alnum {^^ [<alnum> | <alnum>.+] $$}; say "þ," ~~ &alt-alnum; 08:39
committable6 JJMerelo, ¦releases (45 commits): «Nil␤»
JJMerelo committable6: releases my token alt-alnum {^^ [<alpha> | <alpha>.+] $$}; say "þ," ~~ &alt-alnum;
committable6 JJMerelo, ¦releases (45 commits): «｢þ,｣␤ alpha => ｢þ｣␤» 08:40
JJMerelo Added also to R#3830 08:42
linkable6 R#3830 [open]: github.com/rakudo/rakudo/issues/3830 [regex] Strange token alternation errors with <alnum> and <graph> when they are in the second part of the alternation
08:46 sftp left 08:47 sftp joined 08:50 abraxxa left, abraxxa joined 09:07 oddp joined 09:23 wamba left 09:30 markong joined
timotimo does Grammar::Tracer cause these problems? 09:30
JJMerelo timotimo no, I just use it to see where it fails. 09:44
timotimo and what it shows is the opposite: it does not fail, and is totally happy with the match it obtains. 09:45
timotimo ah, i did not look closely enough
09:48 Geth_ joined 09:51 cpan-raku joined, cpan-raku left, cpan-raku joined
cpan-raku New module released to CPAN! Math::Libgsl::RandomDistribution (0.0.2) by 03FRITH 09:51
New module released to CPAN! Sparky (0.0.26) by 03MELEZHIK
09:54 Geth_ left
cpan-raku New module released to CPAN! JSON::Fast (0.14) by 03TIMOTIMO 09:54
09:55 raku-bridge left, Geth__ joined 10:00 cpan-raku left, Geth__ left 10:01 raku-bridge joined, Geth___ joined, cpan-raku joined, cpan-raku left, cpan-raku joined 10:08 markong left 10:10 markong joined 10:12 aborazmeh joined, aborazmeh left, aborazmeh joined 10:14 Altai-man_ joined 10:17 sena_kun left, raku-bridge left 10:24 raku-bridge joined, raku-bridge left, raku-bridge joined 10:31 Geth___ left, cpan-raku left 10:32 raku-bridge left 10:40 cpan-raku joined 10:41 Geth_ joined 10:45 cpan-raku left 10:47 raku-bridge joined, raku-bridge left, raku-bridge joined 10:52 clarkema joined 10:53 Black_Ribbon left 10:55 clarkema left 11:21 rockxloose joined 11:33 patrickb joined 11:36 cpan-raku_ left, Geth left 11:37 cpan-raku joined, cpan-raku left, cpan-raku joined 11:40 cpan-raku left, Geth_ left, raku-bridge left 11:41 Geth joined, raku-bridge joined, raku-bridge left, raku-bridge joined
ab5tract .ask masak When you get a moment, would you mind weighing in on how close the current experimental `macros` interface is to what it could/should look like post-RakuAST? I'm not planning to use anything too crazy but I am curious as well what is maybe still missing versus your/the "master plan" 11:50
11:50 raku-bridge left
tellable6 ab5tract, I'll pass your message to masak 11:50
11:52 raku-bridge joined, raku-bridge left, raku-bridge joined
timotimo what do you currently get passed to a macro? 11:53
11:53 devmikey joined
timotimo m: use experimental :macros; macro test($a) { dd $a; quasi { say "hi" } }; test(1 + 2) 11:53
camelia AST.new
hi
timotimo m: use experimental :macros; macro test($a) { dd $a.^methods; quasi { say "hi" } }; test(1 + 2)
camelia (submethod BUILD (AST: :$past, *%_ --> Nil) { #`(Submethod|78116288) ... }, method incarnate (AST: $quasi_context, @unquote_asts, *%_) { #`(Method|78116864) ... }, method evaluate_unquotes (AST: @unquote_asts, *%_) { #`(Method|78116720) ... }, method …
timotimo m: use experimental :macros; macro test($a) { dd $a.^methods>>.name; quasi { say "hi" } }; test(1 + 2) 11:54
camelia ("BUILD", "incarnate", "evaluate_unquotes", "is_quasi_ast", "Str", "BUILDALL")
hi
timotimo m: use experimental :macros; macro test($a) { dd $a.^methods(:all)>>.name; quasi { say "hi" } }; test(1 + 2)
camelia ("BUILD", "incarnate", "evaluate_unquotes", "is_quasi_ast", "Str", "BUILDALL", "antipairs", "nl-out", "Map", "repeated", "AT-POS", "squish", "kv", "Seq", "combinations", "end", "Hash", "sort", "skip", "prepend", "flat", "permutations", "rotor", "hash"…
timotimo m: use experimental :macros; macro test($a) { dd $a.^mro; quasi { say "hi" } }; test(1 + 2)
camelia (AST, Any, Mu)
hi
11:54 cpan-raku joined, cpan-raku left, cpan-raku joined, sftp left, devmikey is now known as bigdata
timotimo m: use experimental :macros; macro test($a) { dd $a.^mro; quasi { say {{{ $a }}}; say {{{ $a }}} } }; test(1 + 2) 11:54
camelia (AST, Any, Mu)
3
3
timotimo you can probably only create asts using quasi? 11:55
11:56 aborazmeh left 11:57 sftp joined 11:58 JJMerelo left 12:04 bigdata left 12:05 bigdata joined, Geth left, raku-bridge left 12:06 Geth joined, cpan-raku left, raku-bridge joined 12:08 bigdata left, patrickb left 12:09 Geth_ joined, cpan-raku joined, raku-bridge1 joined, cpan-raku left, cpan-raku joined, raku-bridge1 left, raku-bridge1 joined, raku-bridge1 left 12:10 Geth_ left, cpan-raku left
ab5tract timotimo as in, that is the only aspect that is working in the current implementation (and it is working as expected) or that quasi should be able to create something other than AST 12:11
timotimo something other than quasi should be able to create an ast 12:12
ab5tract timotimo my question is really a bit higher level -- can I write against the experimental implementation without regard for internal details (and the fact that they are about to change)
timotimo gotcha :)
so it sounds like the short answer is "no"
timotimo actually i dunno
12:12 cpan-raku joined, cpan-raku left, cpan-raku joined
timotimo BBIAB 12:12
ab5tract ++ 12:13
12:15 sena_kun joined 12:16 Altai-man_ left 12:40 aborazmeh joined, aborazmeh left, aborazmeh joined 12:41 molaf joined 12:43 fluca1978 joined
fluca1978 hi, I'm having some difficulties in understanding what the method tree does <docs.raku.org/routine/tree>. I've understood it does call tree on the iterable or applies a whateverable, but what is the aim? 12:44
lizmat fluca1978: I've never used tree, and I think its semantics sorta became suspect after the GLR 12:46
in fact, the code in the core still carries this comment:
# XXX GLR Do we need tree post-GLR?
fluca1978 lizmat: and GLR stands for ... (I've seen the comment trying to figure out in rakudo what tree was doing) 12:47
lizmat Great List Refactor
during 2014 / 2015 it was decided that the way lists work, needed changing and harmonizing 12:48
this became the Great List Refactor, to make then Perl 6 ready for release
fluca1978 oh, I must have missed the eterogeneity before...I'm using raku only since 2017 12:49
holyghost ok, racul is portable to m68k machines, after severe modularization (which is a good thing :-) 12:50
amiga machines, I mean
ab5tract holyghost what is this racul that you speak of? :) 12:51
holyghost github.com/theholyghost2/racul (scheme language extensions for raku applications) 12:52
It's a guile but written from scratch 12:53
not using anything from guile also
ab5tract neat project :D 12:54
12:54 __jrjsmrtn__ joined
lizmat not a lot to see except some makefiles yet? 12:54
holyghost thx :-) 12:55
12:55 _jrjsmrtn left
holyghost lizmat : there's a start for symbols in src/symbols 12:55
I have to think about it twice
12:57 fluca1978 left
holyghost I've been a machine lately :-) 12:59
12:59 aborazmeh left
El_Che holyghost: sent you a PR for the doc 13:03
13:07 Tirifto joined
holyghost I'll look into it later on 13:07
13:08 ab5tract left
kawaii Are there any modules for turning large numbers of seconds into friendly hours and minutes? :) 13:14
timotimo yes
oddp There's polymod.
kawaii I literally just typed "I bet Timo knows" to my friend, and here you are :)
timotimo github.com/raku-community-modules/...Denominate 13:15
kawaii timotimo: thank you :)
oddp docs.raku.org/routine/polymod
Look at the example.
kawaii Oh this looks good too, and no additional dependency 13:16
m: my $i = 84864; say $i.polymod(60); 13:35
camelia (24 1414)
kawaii m: my $i = 84864; say $i.polymod(3600);
camelia (2064 23)
holyghost I've implemented something like that in Game-Markov 13:36
splitting off ns ms and s
for MarkovTicks
oh well 13:37
oddp m: my ($secs, $mins, $hours) = 84864.polymod(60, 60, 24); say "{$hours}h : {$mins}m : {$secs}s" 13:47
camelia 23h : 34m : 24s
oddp kawaii: ^
13:49 gnufr33dom joined
kawaii oddp: ah that works, thanks! 13:50
timotimo but that only goes up to hours 13:51
kawaii that's all I need in my use-case
oddp m: say 84864.polymod(60, 60, 24)
camelia (24 34 23 0)
oddp You could also get the day there. 13:52
Maybe we should include an example in the docs similar to the one here that makes it quite clear: rakuadventcalendar.wordpress.com/2...t-in-raku/ 13:56
14:00 raku-bridge left
holyghost El_Che : about your PR, you mean that raku is not perl6 std based ? 14:01
14:02 raku-bridge joined, raku-bridge left, raku-bridge joined
oddp It's a naming issue, nothing more, holyghost. 14:03
holyghost ok, mea culpa
right, liz said that it is named raku now
bufgixed, I won't forget next time I hope 14:10
14:12 cooper left 14:14 Altai-man_ joined 14:16 sena_kun left 14:27 Petr37 joined 14:30 john_parr_ joined, xinming left 14:31 xinming joined 14:32 john_parr_ is now known as st_elmo 14:33 molaf left 14:43 Sgeo joined 14:46 molaf joined 14:48 gnufr33dom left 14:56 st_elmo left 14:59 Petr37 left 15:00 skids joined 15:03 raku-bridge left 15:09 raku-bridge joined, raku-bridge left, raku-bridge joined
codesections Here's a style/idiom question for the channel: when tracking a mutable count of elements, do you prefer to use a Hash that tracks the values (and modify with assignment) or a BagHash (and modify with `add`/`remove`). That is, which of these two looks better to you: 15:11
m: my %menu-items = eggs => 1, bacon => 1; %menu-items<spam> += 5; say %menu-items
camelia {bacon => 1, eggs => 1, spam => 5}
codesections m: my %menu-items is BagHash = eggs => 1, bacon => 1; %menu-items.add(<spam>) for ^5; say %menu-items
camelia BagHash(bacon eggs spam(5))
15:12 cpan-raku left 15:13 cpan-raku joined, cpan-raku left, cpan-raku joined 15:25 MilkmanDan left 15:26 rindolf left
guifa2 codesections: it depends on where in my code I am :-) 15:31
The first one is closest to what I'm doing if for some reason it's clearer for me to do that during initiatilization / in the innards of module space
The latter is something I might prefer for user space (but I'd be careful whether "add"means "add to the menu" or "add quantities to an item in the menu", which if doing full OO might should be two separate commands, with the latter one issuing an exception if the item isn't on the menu) 15:34
tbrowder hi, all 15:35
15:38 MasterDuke left
codesections o/ 15:40
tbrowder question on use of mi6: its doc says the build option uses the Build.pm file if it exists. is that the same one zef uses?
codesections: g'day \o/ 15:41
codesections guifa2: thanks, that's a helpful way to think about it. You said you'd do the first "if for some reason it's clearer". What sort of things would make it clearer/less clear?
I haven't used mi6, so I can't help with that one
tbrowder okey dokey, thnx 15:42
guifa2 codesections: basically whitespacing :-) if I make the hash with really simple values (eggs 1, bacon 1, or even biscuits => $baker.check-availability('biscuits') ) I'll probably leave it all in one initial assignment line 15:43
but if the latter gets more complicated
biscuits => min($lookup-suppliers('bakers').grep(*.check-availbility('biscuits').sort(*.request-prices('biscuits')).head, 10) 15:45
It can often be much nicer visually to break that out into a separate line after the initial assignment 15:46
er there's an error in that code but you get he idea
codesections guifa2: that makes sense, except that I don't see how it relates to the choice between a Hash and a BagHash. Both are mutable, so both let you split it into multiple lines if need be 15:51
guifa2 ah, sorry, I was focusing on the .add semantics ;-) 15:52
codesections Oh, I see. So, you're saying you generally disfavor using `+=` – if you think you'll need to modify the state, you'd like to have a `.add` method and let the type manage its state in a more OOP way? 15:53
15:54 MilkmanDan joined
guifa2 It makes sense to me from a user perspective — they don't need to know how your menu works internally. And maybe down the road, you want to change how the menu is stored internally. If you're using add, that's a lot easier since method add($) is easy to make. You *could* still pull it off mimicking Hash's %foo<bar> += 5 using Proxies but it's more work 15:57
codesections Thanks, that all makes sense and is a helpfully different perspective than how I was thinking about it :) 15:59
I was thinking about it more in terms of type constraints: if I have a BagHash, I can't later try to set a key equal to something other than an Int or do any of the weird/powerful things I'd be tempted to do with a plain Hash 16:00
(which is getting at a similar point as part of what you said, but your point about extensibility is a bit different – but points in the same direction) 16:01
guifa2 can you tell I'm someone who mainly does module authoring? lol 16:14
16:15 aindilis joined, sena_kun joined
codesections :D It's a good perspective to have. So many one-off, we'll-throw-it-away-soon scripts end up becoming larger than expected, and early design decisions can come back to haunt people 16:15
e.g., tabs in Makefiles 16:16
16:16 Altai-man_ left
Kaiepi how is endianness handled by blobs? 16:18
eh, ig this is something i can test with nativecall 16:23
16:24 MilkmanDan left
holyghost added amiga vbcc makefile to racul :-) 16:28
Now for the C code, but that's for later 16:30
holyghost is a bit afk 16:31
guifa2 Kaiepi: endianness doesn't feel 100% fleshed out to me. if you use Blob[uin64], I believe it defaults to your system's endianness
there's the read methods on blob8 that let you specifiy endianness, but not on writing 16:32
16:36 Kaiepi left 16:38 Kaiepi joined 16:39 MilkmanDan joined 16:42 dakkar left 16:44 MasterDuke joined 16:45 Kaiepi left 16:49 Kaiepi joined
Kaiepi it seems like the byte order depends on backend 16:56
on the jvm, it seems to be big endian instead of native byte order 16:57
timotimo you need to use a buf8 and .write-uint64 and friends that take endianness 16:58
holyghost I drink only in the evening now, I'm super more productive, which makes me far more happy than calming down with beer. just my 2 cents
timotimo there are no write methods on blobs, because blobs are read-only, i would assume 16:59
guifa2 I'm surprised that the blobs don't have endianness as an attribute 17:01
timotimo that would only do anything when you're writing to files and other byte-oriented streams, right? 17:02
holyghost FWIW, C read and write functions are char based, e.g. WAV headers need endianess 17:04
I dunno for nqp though
aciinum or alphanum functionality 17:06
*ascii num
which you shift << 8, << 16 << 24 for endianess 17:07
or the other way round
32 bits not 64 17:08
or 36
17:09 Black_Ribbon joined
holyghost or a byte in mono (C#) 17:10
guifa2 timotimo: I don't remember the exact details since I don't tend to work a huge maount with binary stuff (but am increasingly looking to do so for performance in intl::) but when I was making binex I remember having a lot of trouble knowing — from a programatic sense — if a blob that was passed to a sub was big or little endian 17:11
An endian-ness doc (with where things are done transparently to the user and where the user needs handle it manually) would be pretty sweet 17:12
jdv79 maybe someday someone will do a thing with/on raku at the hope conf 17:16
17:16 molaf left
jdv79 maybe a lightning talk 17:16
17:36 HarmtH_ left 17:44 kensanata left 17:50 cpan-raku left 18:00 molaf joined 18:08 MasterDuke left 18:10 rindolf joined 18:14 Altai-man_ joined 18:16 sena_kun left 18:24 cpan-raku joined, cpan-raku left, cpan-raku joined 18:29 MilkmanDan left 18:37 lucasb joined 18:39 MilkmanDan joined 18:40 abraxxa left 18:43 abraxxa joined
lucasb What's a easy way to code the utility function 'factor(360) -> (2, 2, 2, 3, 3, 5)' ? I was hoping for a Int.factor method to exist. Wouldn't it be useful? :) 18:50
18:59 SqrtNegInf joined
SqrtNegInf rosettacode.org/wiki/Prime_decomposition 19:00
19:00 guifa2 left
[Coke] m: sub factor($n) { my $r = $n; gather for 2..sqrt($n).Int { while $r %% $_ { $r/=$_ ; take $_ } } } ; say factor(360) 19:09
camelia (2 2 2 3 3 5)
tellable6 2020-07-27T07:45:24Z #raku-dev <JJMerelo> [Coke] I was going to, but it's apparently disappeared? 19:10
[Coke] ^^ shorter, but very likely not performant with bigger numbers.
19:14 xinming left 19:16 xinming joined
[Coke] oops. lost my prime listing. 19:16
19:19 guifa2 joined
[Coke] m: my @primes = (2..Inf).grep(*.is-prime); sub factor($n) { my $r = $n; gather for @primes { while $r %% $_ { $r/=$_ ; take $_ }; last if $r==1 } }; say factor(360); say factor(123456789) 19:20
camelia (2 2 2 3 3 5)
(3 3 3607 3803)
lucasb thanks! SqrtNegInf, [Coke] 19:46
SqrtNegInf There's also the module Prime::Factor (it implements the 1st example at rosettacode.org/wiki/Prime_decomposition#Raku). Best of both worlds: runs quickly, easy to call. 19:48
moritz m: sub f($i) { (^$i).map({ return $_ }) }; say f(2) 19:54
camelia Attempt to return outside of immediately-enclosing Routine (i.e. `return` execution is outside the dynamic scope of the Routine where `return` was used)
in block <unit> at <tmp> line 1
moritz oops, reacting to stale backlog :D 19:55
20:00 SqrtNegInf left 20:03 dolmen joined 20:05 kensanata joined 20:14 sena_kun joined 20:17 Altai-man_ left
gfldex lolibloggedalittle: gfldex.wordpress.com/2020/07/27/ha...g-failure/ 20:17
20:27 rindolf left
Geth ¦ problem-solving: vrurg assigned to jnthn Issue Do we need :desc named in Test routines? github.com/Raku/problem-solving/issues/215 20:38
lizmat and another Rakudo Weekly News hits the Net: rakudoweekly.blog/2020/07/27/2020-...t-on-time/ 20:50
holyghost yay!
holyghost reads it 20:52
I'm going to study Hungarian
20:55 kensanata left 20:59 Xliff joined
Xliff o/ 20:59
oddp Thanks a lot, liz! 21:00
holyghost 'lo Xliff 21:01
Xliff gnolly
holyghost I've put some scheme projects on the server, gondolinX.tar.gz files
busy sorting those out 21:02
too bad scsh does not run on 64 bit systems
so you cannot run them there
21:18 melezhik joined
melezhik lizmat - thanks for yet another rakudo weekly, as usual - good content! 21:19
lizmat thanks to all the people providing that content! :-)
21:19 OpenZen joined
guifa2 lizmat: that's a cool random name module 21:19
melezhik lizmat - sure! 21:20
lizmat thank you, another cool module I made the past weeks, Hash2Class needed it
guifa2 internationalizes it, 'say docker-name :lang<es>' # quijote-épico
;-)
21:27 cpan-raku left 21:52 melezhik left 22:00 skids left 22:07 pecastro left 22:11 dolmen left 22:14 Tirifto left, Altai-man_ joined 22:15 leont left 22:17 sena_kun left 22:32 cpan-raku joined, cpan-raku left, cpan-raku joined
holyghost szendvics 22:43
22:55 oneeggeach joined, oneeggeach left 23:09 guifa2 left 23:31 afresh1 left 23:47 finsternis joined 23:48 oddp left 23:57 MilkmanDan left 23:58 MilkmanDan joined

Powered by Cro and the Raku® Programming Language.

Please report any issues / comments / feature requests as an issue on App::Raku::Log.

Thank you!