🦋 Welcome to Raku! raku.org/ | evalbot usage: 'p6: say 3;' or /msg camelia p6: ... | irclog: colabti.org/irclogger/irclogger_log/raku
Set by ChanServ on 14 October 2019.
00:00 Poohman left 00:11 chloekek left 00:18 tinita joined
tinita hi, I have a question. where does rakudo put the precompiled script? if I call a script for a second time, it is faster, but I can't find the place where it's cached 00:18
I'm asking also because there seems to be no precompiling if I call a script belonging to root as a normal user 00:19
tobs tinita: I have a .perl6/precomp in my home dir but I don't know more about what's happening. 00:26
tinita tobs: ah, hm
jnthn tinita: It depends if it's an installed module (in which case it's at the module installation location) or with -Ilib or `use lib`, in which case it's a .precomp/ directory at that location 00:27
tinita I'm running this in docker where I don't have a regular user, I'm running it with --user $UID
but I did `export HOME=/home/tmp; mkdir $HOME` and it still didn't precompile
jnthn: huh, ok. it's an installed module. the problem is I have no write permission for anything except my homedir, because I want to run docker as non-root 00:28
is there a way to influence the .precomp dir? 00:29
maybe during building rakudo?
jnthn Hmm...it should do the precompilation at module installation time though 00:37
Which I guess would happen during the container build 00:38
I think if you put RAKUDO_MODULE_DEBUG=1 in the environment it may give some clues (or is it MODULES...I forget) 00:39
tinita ok, thanks!
github.com/perlpunk/yaml-runtimes/...install.sh
this is the script I use for installing modules
jnthn Hmm
--install-to=/build/perl6 00:40
I think I'd expect it to precomp then and put 'em in a .precomp/ under there
tinita yes, there is a /perl6/precomp/ there (which is copied from /build/perl6) 00:41
jnthn But now I wonder if it's really the installed things it's precompiling, or non-installed modules of the application?
tinita this is the script: github.com/perlpunk/yaml-runtimes/...mlish-json
I put this into /yaml/bin/raku-yamlish-json
jnthn Aha
use lib "/lib";
tinita oops 00:42
jnthn So it'll be trying to write to /lib/.precomp
But...I don't think you need the `use lib` line at all?
Since the two modules being used are installed
tinita but the target location is /perl6
should I do `use lib "/perl6"? 00:43
jnthn Why are you doing `use lib` at all?
Oh, 'cus a non-standard install location maybe...
But since it isn't pointing at it, if the thing works, well...probably it's not needed 00:44
Does it work without it?
tinita yeah, but then I changed the directory.
I should note that I have this in ENV: PERL6LIB=inst#/perl6
so that's why it works =)
jnthn Aha 00:45
Then you can just drop the `use lib`
tinita ok, i'll try and see if it works then also as non-root, thanks!
00:48 wildtrees left
tinita hm, it put something into /perl6/precomp/, but running the script as a user still doesn't use the cache 00:51
aaah 00:55
The install location is different from the final location in docker :-/ 00:56
it's built in one docker via mount in /build/perl6, but then copied to the second docker to /perl6
stoned75 is whateverable's xbin/build.p6 still relevant ? 00:57
tinita so the cache doesn't recognize it
01:48 evalable6 left 01:50 evalable6 joined 01:51 Altai-man_ joined 01:54 sena_kun left
SmokeMachine I'm trying to run the red-bot on a docker swarm cluster, and the generated random name of the container was: `clever_perlman.1` I think it's a good luck sign... :P 02:49
02:54 evalable6 left 02:55 evalable6 joined 03:11 mahmudov left 03:12 mahmudov joined 03:18 rbt joined 03:30 mahmudov left, mahtob joined 03:31 mahtob left, mahtob joined, mahtob left 03:37 mahmudov joined 03:52 sena_kun joined 03:54 Altai-man_ left 04:44 epony left 05:12 epony joined 05:51 Altai-man_ joined 05:54 sena_kun left 06:13 Doc_Holliwood left 07:13 releasable6 left, bloatable6 left, benchable6 left, unicodable6 left, notable6 left, committable6 left, shareable6 left, quotable6 left, nativecallable6 left, sourceable6 left, bisectable6 left, statisfiable6 left, reportable6 left, squashable6 left, greppable6 left, coverable6 left
xinming_ oops, bots' net died 07:14
07:14 committable6 joined, unicodable6 joined, bloatable6 joined, reportable6 joined 07:15 coverable6 joined, notable6 joined, statisfiable6 joined, quotable6 joined, shareable6 joined, benchable6 joined, greppable6 joined 07:16 squashable6 joined, sourceable6 joined, nativecallable6 joined, releasable6 joined, bisectable6 joined 07:46 Doc_Holliwood joined 07:53 sena_kun joined 07:54 Altai-man_ left 08:17 horsepatat joined 08:18 wamba joined
Geth doc: a0fea36a2d | threadless-screw++ | 2 files
Text refinement; closes: #2920
08:27
doc: 980235f0ae | threadless-screw++ | doc/Language/101-basics.pod6
Deletion of "so"
doc: 116ccf6b1d | (Juan Julián Merelo Guervós)++ (committed using GitHub Web editor) | 2 files
Merge pull request #3142 from threadless-screw/assignments

P6-101 text refinement + expansion of assignment operators section; closes: #2920
doc: f94c3daf04 | (JJ Merelo)++ | doc/Type/QuantHash.pod6
Review and edits while checking #2632
08:42
doc: 4738bad7e9 | (JJ Merelo)++ | doc/Language/setbagmix.pod6
Minor editions to reflect new set semantics refs #2632

Also some reflow.
doc: dfa828c7f8 | (JJ Merelo)++ | 3 files
Eliminates examples with set_precedes operators refs #2632
09:25 rindolf joined 09:52 Altai-man_ joined 09:54 sena_kun left 10:04 wamba left
AlexDaniel stoned75: yes 10:04
stoned75: why do you ask? :)
xinming_: it's actually not the net dying, the story behind it is quite interesting 10:05
xinming_: basically… it's a watchdog that gets triggered when people are not speaking for a long time
I should fix that :) 10:06
10:15 horsepatat left 10:53 wamba joined 10:58 aluaces left
stoned75 AlexDaniel: hi. Hum... I can't recall :-} it was late last night, I was trying to use it to generate a set of container images to have my own offline, containerized, Committable 11:04
AlexDaniel stoned75: you can fetch the builds instead of wasting your cpu cycles :) github.com/perl6/whateverable/wiki/Shareable 11:05
throw them into your container and it will probably work (?)
stoned75 how nice !
ah yes. I remember now. whateverable/xbin/build.p6 and rakudo/Configure.pl --git-reference interaction seems to be broken. I had the understanding that now git-reference option is a noop for rakudo's Configure.pl and that current whateverable's build.p6's git clones layout breaks older rakudo's Configure.pl --git-reference assumption 11:10
AlexDaniel hmmm
stoned75: ohhh yes
11:11 libertas left, libertas_ is now known as libertas
AlexDaniel stoned75: what if you tweak these? github.com/perl6/whateverable/blob...p6#L33-L36 11:11
so that you're only building the new stuff
11:12 libertas left, rbt left, rbt joined 11:13 libertas joined
stoned75 yes of course that would work. but as I wanted to build old release, I ended up tweaking RAKUDO-NQP-LATEST to take advantage of git-reference 11:13
oh, and as I was building in containers too, where I initially forgot to install zstd, I encountered a kind of silent compression step error ;-) 11:15
11:16 libertas_ joined
AlexDaniel stoned75: :) 11:20
11:20 chloekek joined
AlexDaniel stoned75: it's a downside of having a centralized tool, I guess 11:20
“it works for me” :)
stoned75 sure :) 11:21
11:53 libertas left, libertas_ is now known as libertas, sena_kun joined 11:54 libertas_ joined, Altai-man_ left 12:20 rbt left 12:29 rindolf left 12:37 rindolf joined 12:52 wamba left 12:58 kensanata joined, mahmudov left, stoned75 left 12:59 stoned75 joined 13:48 Doc_Holliwood left, Doc_Holliwood joined 13:53 Altai-man_ joined 13:54 sena_kun left 14:10 AlexDaniel left 14:31 rindolf left
Geth doc: 21e6301c41 | (Stoned Elipot)++ | assets/js/main.js
Fix broken JavaScript code

  ... by unescaped newline in string
14:40
doc: dca1c790c6 | (Stoned Elipot)++ | assets/js/main.js
Update IRC channel name to #raku in link's content
14:43
14:46 rindolf joined 14:50 horsepatat joined 15:14 kensanata left
holyghost I am going to code a video server using perl6 with use of pagan, it's on Xliff's server 15:14
the meaning is to serve TV using a dumb blitter and then put an AI in using video code 15:15
pagfan is the dumb litter
*blitter
*pagan
You can attract a video stream using an AI, to serve, using chaos theory. Which still is a research topic. 15:24
15:24 epony left
holyghost I finished my "chaos : a statistical theory" book 15:25
:-)
s/theory/perspective
15:27 epony joined
holyghost I went with my code from a PowerPC to an i5 though 15:29
15:34 kensanata joined 15:52 kensanata left 15:53 sena_kun joined 15:55 Altai-man_ left 16:00 rindolf left 16:02 rindolf joined 16:06 pmurias left 16:08 mahmudov joined 16:09 wamba joined 16:17 pmurias joined 16:18 kensanata joined 17:24 jmerelo joined 17:25 shred_alert joined 17:37 sauvin left 17:38 sauvin joined 17:44 kensanata left 17:45 kiwi_7 joined 17:46 cpan-raku left 17:47 cpan-raku joined, cpan-raku left, cpan-raku joined 17:48 robertle left 17:52 Altai-man_ joined 17:55 sena_kun left 17:58 patrickb joined
lizmat .tell holyghost it's called Raku nowadays :-) 18:05
tellable6 lizmat, I'll pass your message to holyghost
shred_alert Btw, Raku is called Perl 6 on Rosetta still. 18:07
Dunno who's in charge of changing that
chloekek Also on glot.io 18:09
And it’s a very old Rakudo too :P
.oO(perl6do)
kiwi_7 no raku on glot.io, only perl6 v2018.04.1 18:15
no raku on tio.run, only perl6 v2018.12 18:16
both raku and perl6 on repl.it, v2019.03.1 18:17
(but not listed at repl.it, you have to know/enter the URL: repl.it/languages/raku 18:18
perryprog shred_alert, check out rosettacode.org/wiki/Category:Raku 18:21
Seems like they don't plan on changing it.
"In particular, here on Rosetta Code essentially all tasks are currently listed under Perl 6, and there are no immediate plans to change this." 18:22
shred_alert :( saed 18:24
thundergnat I am an admin on Rosettacode. We have been holing off on doing a mass rename until there are a few Raku releases out so all (most) of the problems have been shaken out. Also, there are some 1145 pages that will need editing... Not looking forward to that. :-(
*holding
perryprog Not to mention, what's the whole deal with image uploading?
Is short circuit still MIA?
thundergnat Mike Mol is very scarce for the past few years. 18:25
shred_alert @thungergnat what do you mean by "editing"?
perryprog Hm, yeah. Last contrib was 2018 March
thundergnat He disabled image uploading as there were some with malicious code embedded and hasn't gotten around to implementing the advanced filtering or whatever he had planned. 18:26
perryprog Oh that's fun. 18:27
thundergnat shred_alert: Every page that has a Perl 6 entry will need to be somewhat manually edited to do the rename. (The tasks are not automatically alphabetically sorted.)
perryprog Well anyway, cheers for helping out on there o7; RC has been a great resource for learning for me, and I'm sure many other people as well. 18:28
thundergnat So, rename, edit all mentions of Perl 6 then move to the correct position in the page. 1150 times....
shred_alert Most times I've said Raku(do) people react pretty well to the language. Saying Perl 6 doesn't go nearly as well. 18:30
It's dumb but that's just how it's been for me :/ 18:31
18:36 no-n left 18:38 pmurias left
perryprog Oh, how is Raku pronounced? Is it RA-KOO? (e.g. in enPR, räko͞o or in IPA, /rɑku/) 18:39
That's how I've been saying it in my head, but I've never heard anyone actually say it out loud 18:40
Altai-man_ perryprog, "r" as in "right", "a" as in "archer", "k" as in "cat", "u" as "oo". 18:41
18:48 stoned75 left
thundergnat By the way, if there is anyone about that is familiar with cro services, and has a small amount of time, I would appreciate you taking a look at rosettacode.org/wiki/URL_shortener#Perl_6 and make sure I didn't do anything incredibly stupid. 18:51
It's my first attempt a using cro and I probably made some poor choices / assumptions.
As it's a fairly heavily viewed site, I'd like to make sure I haven't messed things up too bad. (nine?, jnthn? anyone>)
18:53 stoned75 joined
Altai-man_ thundergnat, why not make $urlfile IO::Path and save `.IO` calls? 18:55
thundergnat hmm. Good point
Altai-man_ also it is matter of taste, of course, but spurt/slurp are much nicer when used as subs... (at least in my taste, ok, admitting that)
thundergnat, :host($host) can be written as just `:$host`, the same with port 18:57
not sure if we need such a golf, of course
is there really a need to introduce `retrieve` sub? 18:58
thundergnat Hey, while I'm tweaking things, may as well make it idiomatic.
Altai-man_ thundergnat, why do you need to store `index` if it isn't used anywhere?
ah, stop, I am a dummy 18:59
thundergnat <retrieve> Possibly not, that was left from many iterations of trying things that didn't work.
Altai-man_ cro usage looks fine 19:00
also, this ??!! in `get -> $short` can be written as... 19:01
`with %urls<url>{$short} { redirect :permanent, $_ } else { not-found }`
add newlines matching your taste, of course 19:02
no odd parens and looks more readable
or maybe
with %urls<url>{$short} -> $link { redirect $link... } else ...
to clarify
thundergnat, hope that helps. respect for writing those examples! 19:03
thundergnat Sorry if I'm slow to respond, I'm editing in another window,
Thanks, for the pointers! 19:04
Altai-man_ no problem, you are welcome. :) 19:05
19:08 shred_alert left 19:10 kiwi_7 left, raiph joined
perryprog Altai-man_, thank you. 19:10
raiph Hi all 19:12
Is there a way to install a module version with zef that isn't the latest?
jmerelo hey, raiph
tellable6 hey jmerelo, you have a message: gist.github.com/b8b3cd48494fabb83a...a559f06fa2
raiph Hi jj :) 19:13
jmerelo raiph: I want to say yes. Very likely, but the syntax escapes me
raiph For example. JSON::Fast. I want to install 0.9.7 instead of the latest, 0.10. 19:14
Altai-man_ raiph, have you tried e.g. Foo:ver<foo>?
raiph When I run zef install JSON::Fast:ver<0.9.7> I get these results: 19:15
jmerelo .tell uzl[m] possibly "cruce", at least if we look at the railway or motorway sense. In a mechanical or electronical sense, juntura or unión
tellable6 jmerelo, I'll pass your message to uzl[m]
jmerelo raiph: the problem is that, even if there's a way to specify that, there's no way to actually download it from the ecosystem. If it's in CPAN, it might, but I'm not sure either. 19:16
raiph jj: it's not that simple, gimme a mo 19:17
jmerelo raiph: it's never that simple. It's possible that, if there's a copy in the local cache, you can install that one using zef. But definitely impossible for those in the ecosystem, unless all versions are specified. 19:18
raiph: I mean specified in the META.list file. 19:20
raiph Heh. You just answer the question I had ("what do u mean by...") :)
So I think you're saying the following is what you've experienced: 19:21
uzl[m] m: say Dateish.new(:year<2016>);
camelia Cannot call Dateish.new with these named parameters: year
in block <unit> at <tmp> line 1
uzl[m] m: say DateTime.new(:year<2016>);
camelia 2016-01-01T00:00:00Z 19:22
jmerelo uzl[m]: answered above. Would say that the correct words is "unión", in the context.
uzl[m] Given that roles can be punned, why can't I instatiate the role Dateish?
raiph Uploaded file: uploads.kiwiirc.com/files/e8986d83...pasted.txt 19:23
uzl[m] jmerelo: Oh, great. Thanks, JJ!
jmerelo raiph: you hae probably seen this, right? github.com/perl6/problem-solving/issues/72
raiph: you can do that if it's in CPAN. You can't if it's in GitHub 19:24
raiph JJ: nope, that's the ticket, many thanks
jmerelo raiph: also, isn't two different versions listed there? Its identiti says 0.10, but the installed version is 0.9.7? 19:25
raiph: so what's it's actually doing is picking up version 0.10 and installing it as 0.9.7? Is that so? 19:26
raiph jmerelo: Indeed, that's what it says. I don't know what it means.
I'll investigate a bit more. I wanted to ask before investing more time. 19:28
jmerelo raiph: good luck. And great to see you around. Happy new year. 19:29
raiph jmerelo: Thanks for the info and filing the issue. Happy 2020s.
jmerelo raiph++
19:34 pmurias_ joined 19:52 patrickb left 19:53 sena_kun joined 19:54 Altai-man_ left 19:55 jmerelo left 19:57 horsepatat left 20:13 redable joined 20:21 redable_ joined, redable_ left 20:22 rir joined 20:24 redable left 20:27 rir left 20:34 kensanata joined 20:36 redable joined 20:37 redable left 20:41 i_understand_now joined
i_understand_now Hi. I understand now. "cpanm" is for installing a package (or library) on the system, while "carton" is for manage package (or library) dependancy of a project. 20:41
It's that, or not ?
sena_kun i_understand_now, do you want #perl channel or #raku channel?
i_understand_now sena_kun both 20:42
sena_kun i_understand_now, well... raku is a different language compared to perl (5), so cpanm and carton are not really related to it
i_understand_now sena_kun I'm sorry 20:43
The fact is that a lot of raku developper are experienced perl developer
sena_kun no problem, just saying you'll probably have a better luck asking at #perl. there are indeed some perl devs around. 20:44
i_understand_now OK. Thanks 20:46
20:49 i_understand_now left 21:00 raiph left 21:05 rindolf left
stoned75 m: say Str 21:10
camelia (Str)
stoned75 m: say Cool
camelia (Cool)
stoned75 eval: say Cool
evalable6 (Cool)
stoned75 ah, the repl can give surprising result 21:12
eval \(Str: 1); say Str 21:18
eval: \(Str: 1); say Str
evalable6 Label<Str>(at /tmp/F9nnRBNltf:1, '03\(08⏏04Str03: 1); say Str')
stoned75 eval: Str: 1; say Str 21:19
evalable6 WARNINGS for /tmp/8wjPv_GXdR:
Label<Str>(at /tmp/8wjPv_GXdR:1, '0308⏏04Str03: 1; say Str')
Useless use of constant integer 1 in sink context (line 1)
21:28 wamba left
SmokeMachine AlexDaniel`: What mean `▬▬▶ _ ❚⚠❚ : ERROR Closing Link: ************` on Whateverable with DEBUGGABLE=1? 21:28
AlexDaniel`: what about `▬▬▶ _ :hitchcock.freenode.net 461 * PASS Not enough parameters`?
21:34 kensanata left 21:52 Altai-man_ joined 21:54 sena_kun left 21:56 aluaces joined 22:01 Doc_Holliwood left 22:13 raiph joined
Geth doc: 670a4df327 | Coke++ | doc/Language/operators.pod6
remove duplicate word
22:23
doc: f9d79000cc | Coke++ | doc/Language/community.pod6
whitespace
doc: 41c2ca512b | Coke++ | doc/Language/operators.pod6
semicolons required
22:28 AlexDaniel joined, AlexDaniel left, AlexDaniel joined
AlexDaniel SmokeMachine: that's something about IRC itself 22:29
SmokeMachine: I think you trying to identify with an empty password or something like that
raiph thundergnat: ($urlfile.IO.e and $urlfile.IO.f and $urlfile.IO.s) can be written ( $urlfile.IO ~~ :e & :f & :s ) or ( $urlfile.IO ~~ (:e :f :s) .all ) 22:30
SmokeMachine AlexDaniel: but why it works on my machine but it doesn't on aws?
AlexDaniel SmokeMachine: different settings?
SmokeMachine: password is not set?
SmokeMachine same container...
AlexDaniel hmm
SmokeMachine should I open any specific port?
AlexDaniel SmokeMachine: I don't know
22:35 Doc_Holliwood joined
SmokeMachine AlexDaniel: I think you are right about the password: `▬▬▶ _ :barjavel.freenode.net NOTICE redabletest *** Notice -- You need to identify via SASL to use this server` 22:35
22:41 redable joined 22:42 redable left 22:43 silug left 22:45 redable joined
SmokeMachine AlexDaniel: when I run `docker service create --secret=github_token --name=red-bot fernandocorrea/red-bot-run` on my machine, it works... when I run the same command connected to my aws docker cluster (of 1 node) it doesn't work... 22:46
:(
red: say "OK" 22:48
redable SmokeMachine,
SmokeMachine :(
22:48 silug joined 22:49 redable left 22:51 aluaces left 23:01 raiph left 23:02 raiph joined 23:14 chloekek left 23:50 stoned75 left, stoned75 joined 23:53 sena_kun joined
jdv79 what does "Cannot invoke this object (REPR: Null; VMNull)" mean exactly? 23:53
pretty sure the objects i built were not Null...
23:55 Altai-man_ left